This is the Dumas Dauntless 49.5" Commuter Boat.
Dumas states that you Can Make this Boat Either Electric or Gas Powered.
FEATURES: Plywood construction
Die-cut pieces
Highly detailed deck hardware
Molded plastic pieces
3/4"-1" scale appearance
Gas or electric R/C powered (up to the modeler)
INCLUDES: All the wood parts required for assembly, plastic parts, decking
hardware, brass rods, fully detailed instructions and plans.
REQUIRES: 14x50 flat building board, soldering iron, hobby knife, hobby saw,
hammer, drafting triangle, drills, 2 ounce fiberglass cloth, epoxy,
CA, polyester finishing resin, microballoons, sandpaper, paints,
Dumas hardware kit #2332. SEE COMMENTS FOR POWER PLANTS AND PROPS.
SPECS: LENGTH: 49-1/2" Width 14" Scale 3/4"-1"
COMMENTS: Power Props Speed
Single 6v or 12v motor 3114-3115 3-4 mph
per shaft direct drive (L & RH 3 bld)
2 6v or 12v motors 3112-3113 5-7 mph
per shaft (no reduction) (L & RH 3 bld)
.19-.25 glow engine 3105-2 bld 9-15 mph
3117-3 bld
.29-.40 glow engine 3115-1-3/4" 3 bld 15-20 mph
3113-2" 3 bld
ir/jl