This is the Great Planes Extra 300S .40-size ARF Aerobatic Sport Scale
Airplane Kit. This ARF is covered in Top Flite MonoKote.
FEATURES: Constructed of Balsa and Plywood, with the entire fuselage
consisting of interlocking, die-cut parts.
Large Radio Compartment allows Quick Access to the Fuel Tank Area.
Pre-Painted and Striped ABS Cowl and Wheel Pants for Scale Appearance
and Heavy Duty Aluminum Landing Gear for Durability
Highly Aerobatic Plane has a Fully-Symmetrical Airfoil and Performs
Any Manuever with "Extra Gusto.
Great 2nd or 3rd Kit if you can safely handle a 40-Size Low-Wing.
INCLUDES: Clear Canopy, Adjustable Engine Mount, Hardware, Pushrods, CA Hinges,
Control Horns, Tailwheel Bracket, Aluminum Landing Gear, Wheel
Pants, Decal Sheet, Fiberglass Tape, 2.5" Red Spinner, Wing Belly
Pan, Left & Right Wing Panels, Fuselage, Tail Sections, Cowl,2-1/2"
Wheels, 1" Tail Wheel, Wood Servo Trays and Wing Joiners, Great
Planes 10oz Fuel Tank and Photo-Illustrated Instructions.
REQUIRES: Engine: .40-.51 (2-stroke) or .48-.80 (4-stroke)
Muffler: Stock (has a tunnel for exhaust down belly DO NOT use pitts)
Radio: 4 Channel Radio
Servos: Five Standard (2-aileron, 1-elevator, 1-throttle, 1-rudder)
(a high torque servo is suggested for the rudder, but not required)
Y-Harness (1-to connect aileron servos)
Misc. Items: Glow Plug, Propeller, 1/4" Foam Rubber, Easy Fueler,
Flex Cables, Fuel Tubing, Fuel Filter, Building and Field Equipment,
1/5 scale Pilot and 6-32 Tap.
SPECS: Airfoil: Fully-Symmetrical Low-Wing THROWS:
Wingspan: 58" HI Elev 5/16 up 3/8 down
Wing Area: 594 sq in LO Elev 1/4 up 5/16 down
Wing Loading: 24 oz per sq ft HI Rudd 2-1/8 rt/left
Weight: 5.75 lbs LO Rudd 1-1/2 rt/left
Length: 48" HI Aile 3/8" up/down
CG: 4" aft of leading edge LO Aile 1/4" up/down
COMMENTS: The covering used on this Extra 300S are Top Flite Missle Red, Jet
White and Insignia Blue.
The paint on the cowl and wheel pants is Top Flite Missle Red.
The Warranty on Great Planes Airplanes is 90-Days.
The nuts on the firewall can get paint in them, so a 6-32 tap is
required to clean the threads out.
ir/jl
|