This is a Radio Controlled, Glow Powered, Balsa and Plywood
Great Planes Fokker Dr.1 .60 Sport Scale ARF Airplane.
For Intermediate to Advanced Modeler/Flyers.
Baron Von Richtofen, better known as the "Red Baron" flew to many victories
in WWI in this blood-red Triplane.
IMAA Giant and 1/4 Scale Legal.
FEATURES: All wood airframe is precovered in a historically accurate Top Flite
Monokote trim scheme, with a fiberglass cowl that's painted White.
The white fiberglass cowl adds a contrast to the rich, red
Monokote covering, and showcases the replica rotary engine and
machine guns. It will enclose any engine in the recommended range.
The triangular, fuse level stab, distinctive round fin and wooden
tail skid add nostalgic scale detail.
The wings feature the "round-the-corner" ailerons that were common
in early aviation design. Two aileron servos (one in each half
of the top wing) offer strength and speed on demand.
The three wings are built, covered and one-piece, which reduces final
assembly to just 15 hours.
Wing skids are not included.
Authentic wood interplane struts and tail skid (not wheel) and
replica machine guns are included.
All three wings are flat-bottomed, but the top wing features
dual aileron servos for dogfighting agility.
Heavy-duty wire Gear attaches to scale landing gear airfoil and
wheels.
Spacious radio compartment allows easy radio gear installation and
quick fuel tank access.
Warranty: 90 days
INCLUDES: Prebuilt, precovered airplane, pushrods, prebent aluminum
main landing gear, nylon adjustable engine mount, hardware
package, Fiberglass cowl, decals, scale wheels, optional dummy
engines and guns, and photo-illustrated instructions.
REQUIRES: Engine: .46 or .75 cu in 2-Stroke
OR .52 or .80 (8.5-13cc) 4-Stroke
Muffler: To fit your choice of engine.
Radio: 4 or 6 channel
Servos: 5 w/ 45 oz/in torque minimum
Servo Extension Two-6"
Servo Extension One-12"
Y-Harness: One
Switch and Charge Jack Mounting Set
Misc. Items: Fuel tubing, fuel filter, prop, building and field
equipment.
SPECS: Wingspan: 60" (1525mm)
Wing Area: 1312sq in (84.6q/dm2)
Weight: 9.1lb (4120g)
Wing Loading: 15.9oz/sq ft (49 g/dm2)
Length: 48" (1220mm)
Center of Gravity: 2-5/8" back from leading edge of the middle wing
Control Throws- Low Rate High Rate
Ailerons: Up & Down 3/4" 1/2"
Elevator: Up & Down 3/4" 1"
Rudder: Right & Left 1-1/4" 1-3/4"
COMMENTS: Pilot shown is not included in kit.
kh10-26-01
ir/kh
|