This is a Low Band (11-35), On-Board, Radio Control Aircraft Flight Pack.
This pack goes into the aircraft to receive and control the radio functions.
Note: This flight pack DOES require a receiver crystal & battery (see REQUIRES)
This receiver can read either 512 or 1024 resolution.
FEATURES: Designed for modelers who want to use a single radio transmitter
to fly several different model aircraft, especially pilots who
are utilizing computerized radios with multi-model memory.
Dual Conversion FM 72MHz low-band tuned receiver.
One year warranty on the receiver and servos.
INCLUDES: One Low-Band Flight Pack containing:
One R127DF FM Dual Conversion Receiver (FUTL43**)
Four S3004 Ball Bearing Servo (FUTM0004)
One Switch Harness with charging plug (FUTM4370)
One 9" Servo Extension Wire (FUTM3910)
One Set of Servo Accessories for all servos (FUTM3551 x 4)
One Warranty Card
REQUIRES: FUTL57** Receiver Crystal on any channel from 11 to 35.
FUTM1295 600mAh Sanyo NiCd Receiver Battery
FM 72MHz Transmitter.
Phillips head screwdriver to mount the servos.
SPECS: See each individual stock number above for their specifications.
COMMENTS: For High-Band Flight Pack on any channel from 36 up to 60, use
FUTL0136.
Receiver battery must be charged with (FUTM1800) charger before use.
Servos plug into the receiver as follows:
Channel 7 (Optional)
Channel 6 (Optional Flap Servo)
Channel 5 (Optional Landing Gear Servo)
Channel 4 (Standard Rudder Servo)
Channel 3 (Standard Throttle Servo)
Channel 2 (Standard Elevator Servo)
Channel 1 (Standard Aileron Servo)
Channel B (Switch Harness/Battery Slot)
JAL 3/28/01
ir/jl
khupdated1-11-02
