This is a High Band (36-60), On-Board, Radio Control Aircraft Flight Pack.
This pack goes into the aircraft to receive and control the radio functions.
Note: This flight pack does require a receiver crystal (see REQUIRES).
This receiver can read either 512 or 1024 resolution.
FEATURES: Designed for modelers who want to use a single radio transmitter
to fly several different model aircraft, especially pilots who
are utilizing computerized radios with multi-model memory.
Dual Conversion FM 72MHz low-band tuned receiver.
One year warranty on the receiver and servos.
INCLUDES: One High-Band Flight Pack containing:
One R127DF FM Dual Conversion Receiver (FUTL43**)
One 600mAh Sanyo NiCd Receiver Battery (FUTM1295)
Four S3003 Standard Servo (FUTM0031)
One Switch Harness with charging plug (FUTM4370)
One 9" Servo Extension Wire (FUTM3910)
One Set of Servo Accessories for all servos (FUTM3551 x 4)
One Black Neck Strap No Number
One 2+1 Servo Mounting Tray (FUTM2670)
One Flight Pack Instruction Sheet No Number
REQUIRES: FUTL58** Receiver Crystal on any channel from 36 to 60.
FM 72MHz Transmitter.
Phillips head screwdriver to mount the servos.
SPECS: See each individual stock number above for their specifications.
COMMENTS: For Low-Band Flight Pack on any channel from 11 to 35, use
FUTL0511.
Receiver battery must be charged with (FUTM1800) charger before use.
Servos plug into the receiver as follows:
Channel 7 (Optional)
Channel 6 (Optional Flap Servo)
Channel 5 (Optional Landing Gear Servo)
Channel 4 (Standard Rudder Servo)
Channel 3 (Standard Throttle Servo)
Channel 2 (Standard Elevator Servo)
Channel 1 (Standard Aileron Servo)
Channel B (Switch Harness/Battery Slot)
JAL 2/22/01
ir/jl
khupdated1-11-02