This is the radio controlled, glow powered, almost-ready-to-fly,
Great Planes Gee Bee .75-1.20 Sport Scale Airplane.
Recommended for modelers who have had trainer airplane experience and
also have safely flown and landed low wing sport planes.
++ Additional Technical Information Will Be Added As It Becomes Available. ++
FEATURES: Construction: Molded fiberglass fuselage and rudder
Wings:
Covering: Factory applied Top Flite MonoKote
color scheme is
Radio Compartment:
Cowling: Painted fiberglass with stand-off for proper engine cooling
Canopy: Single, clear
Wheel Pants: Painted fiberglass
Landing Gear:
Dual Aileron Servos: Standard size servos mount in wing for short
servo-to-control surface linkage, resulting in swifter, stronger
response
Building Time: Ready to fly in several hours.
Warranty Period:
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent / " main landing gear, " tailwheel wire,
" main wheels, " tailwheel, engine mount,
oz fuel tank, " spinner, wood servo trays and wing joiners,
hardware package and photo-illustrated instructions.
REQUIRES: Engine: .75 - .90 cu in (12.5 - 14.5cc) 2-stroke
OR .1.20 cu in (19.5cc) 4-stroke
Muffler:
Radio: 4 Channel
Servos: 5 Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
(a high torque servo is suggested for the rudder, but not required)
Servo Extension 6": qty.
Y-Harness: One for aileron servos
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.
SPECS: Wingspan: 66" (1675mm)
Wing Area: 683 sq in (44 sq dm)
Weight: 10.75 lbs (4.88 kg)
Wing Loading: 36.2 oz/sq ft (110 g/sq dm)
Length: 46" (110mm)
Airfoil: low-wing
Center of Gravity: - / " ( mm) Back from the wing's leading edge
Control Throws- High Rate Low Rate
Elevator: Up & Down / " ( mm) / " ( mm)
Rudder: Right to Left / " ( mm) / " ( mm)
Ailerons: Up & Down / " ( mm) - / " ( mm)
COMMENTS:
Pilot shown inside the plane is not included.
jxs 6/17/03
|