This is a 1/4 Giles G-202 Almost-Ready-to-Fly Aerobatic Airplane Kit.
For Intermediate to Advanced Modeler/Aerobatic Flyers.
This aircraft is IMAC (scale aerobatics) and IMAA (giant & 1/4 scale) Legal.
FEATURES: Flight-ready in just 15-20 hours, using the same skills and
techniques used to build .40-size ARF aerobats.
Interlocking balsa/ply parts, Great Planes hardware, factory-painted
fiberglass accessories - and a dazzling, factory-applied
Top Flite MonoKote finish.
Monokote colors are: Blue, Orange, True Red, White, and
Yellow.
Includes canopy and heavy-duty aluminum landing gear.
Designed to deliver .40-size snap and sizzle in performance, with
an OS Max Surpass 120 or SuperTigre G-2300 power plant.
Duplicates the maneuvering speed and authority of mid-sized aerobats,
with an aileron servo in each wing, plus a rudder servo and twin
elevator servos on the tail (competition style).
Matches the fuselage of the full-size Giles contour, complementing
true-to-life performance with authentic appearance.
Steerable tailwheel operates off the rudder servo.
INCLUDES: Pre-Built Fuselage, Wing Halves and Tail Assemblies, Clear Canopy,
Pre-Bent Aluminum Main Gear, Pre-Painted Fiberglass Wheel Pants
Cowl and Belly Pan, Photo Illustrated Instruction Manual,
Main wheels (GPMQ4225) and axles (GPMQ4277)
Fuel Tank (420cc)=14ozs use (GPMQ4106)
REQUIRES: Engine: 1.2-2.0 (19.5-33cc) 2-/4-stroke Glow OR Gas (see comments)
Radio: 4-6 channel
Servos: 1 Standard (1-Throttle)
5 High Torque (65 oz/in {4.7g/sq dm})
(2-Aileron, 2-Elevator, 1-Rudder)
Servo Extensions: Five 24" for aileron, elevator, and rudder servos.
Servo reverser for elevator servos
Misc. Items: 3-1/2 to 4" spinner, building, and field equipment
SPECS: Wingspan: 73" (1855mm)
Wing Area: 973 sq in (62.8 sq dm)
Wing Loading: 29.6 oz/sq ft (90.3 g/sq dm)
Weight: 12.5 lb (5670g)
Length: 64.5" (1640mm)
Airfoil: Full Symmetrical, Lower Wing
Center of Gravity: 9-1/4" (236mm) Forward from Trailing Edge of the
wing, next to the fuselage. (Plane is upside down while doing this)
Standard Control Throws- Up Down
Elevator: 5/16" (8mm) 7/16" (11mm)
Ailerons: 3/8" (9.5mm) 3/8" (9.5mm)
Right Left
Rudder: 2" (50mm) 2" (50mm)
Advanced 3D Control Throws- Up Down
Elevator: 1-7/8" (47mm) 1-7/8" (47mm)
Ailerons: 1-1/4" (32mm) 1-1/4" (32mm)
Right Left apd
Rudder: 5" (130mm) 5" (130mm) 09/29/00
Thrust: 2 deg right, 1 deg up thrust
Incid: +1 stab; 0 wing
COMMENTS: The wheel and axles ARE included in the kit.
The model was test flown extensively on the G2300 and performed
3D very well. The aircraft balanced perfectly on the G2300.
If mounting the FT160 Twin engine or larger,a mounting spacer or
"engine box"is needed to extend engine to proper location.
Materials/instructions for box not included in kit.
|