These Vertical Presses are used with the Magic Magnet Builing Board System.
FEATURES: Direct Replacement Part
Used for holding down warped spars, as well as leading edge planking.
These parts come UNASSEMBLED
INCLUDES: Five red plastic Vertical Presses (UNASSEMBLED) 'L' shaped
Five red plastic Forks (these slid onto the top of the presses)
Five red plastic Press Plate (rectangular w/cupped hole)
Five 3/16" diameter x 4" bolts
One 5" piece of 3/16" i.d. plastic tubing (you cut this into 5
smaller pieces)
REQUIRES: Magic Magnet building board including 2-8 magnets for attachment
(GPMR7025 for additional magnets)
COMMENTS: For best performance, the press plate should swivel.
Depending upon the load required, attach 2-8 magnets
to the assembled Vertical Stand.
ir/jl