This is a Radio Controlled, Glow Powered, Almost-Ready-to-Fly,
   Kyosho F-16 Falcon Ducted Fan Jet Airplane with O.S. Max .15CV-DFX Engine.
                         For Advanced Modeler/Flyers.
           This kit is part of Kyosho's SQS (Super Quality Series).
                     Designed for Mach 1 maneuverability!

FEATURES: Fuselage is one piece color-molded fiberglass, and is protected by a
            gel coating.
          Factory-assembled wings and tail feature strong, lightweight balsa
            rib construction, and pre-covered with film.
          Comes with a tough fiberglass fan unit and an OS .15 CV-DF engine
            with tuned pipe, manifold and coupler.
          Dual servo set-ups on ailerons and elevators push "turn and burn"
            potential to the max.
          Tuned pipe optimizes performance by maintaining rpm, enlarged chin
            scoop and side intakes trap passing air for maximum performance
            thrust.
          Aerodynamic 150cc fuel tank is shaped to smooth air flow, and
            equipped with a priming bulb for clean, easy starts, Mounts with
            supplied hook and loop strips.
          Trim package is complete with stencils and markings for the proto-
          type aircraft in the red, white and blue color scheme
          The newly developed ducted fan unit offers exceptional performance,
            and enhances the model's profile by doing away wtih the propeller.
          Includes O.S. Max .15CV-DFX Ducted Fan engine with special manifold
            and muffler that help keep the engine running at the proper rpm.
            This engine delivers incredible thrust for breathtaking speeds
            without a propeller, and turns over with a simple pull on the
            recoil starter which is concealed inside the fuselage.  Glow clip
            or glow starter can be attached throught the access hole on top.
          Landing Gear: Fixed wire, steerable nose gear.
          Clear canopy
          Building Time: Ready to fly in several hours.
          Warranty Period: 90-days

INCLUDES: Pre-built fuselage, wing, tail assemblies, OS 15CV-DFX (see COMMENTS
            engine, pre-bent, 10"/ 254mm main landing gear, 5"/ 127 mm nose
            gear wire, 2.18"/ 55mm foam landing gear wheels, manifold, coupler
            and muffler, plastic engine mount, fuel tank, wood servo trays and
            wing joiners, hardware package, pushrods and pushrod tubes,
            photo-illustrated instructions.

REQUIRES: Radio:  4 Channel
          Servos: 6 Micro
          Servo Extension 24"-4 required
          Servo Y connectors: 2 required
          Misc. Items: 1/4" foam rubber padding, medium fuel tubing, fuel
            fuel filter, CA & epoxy glue, building and field equipment.

SPECS:    Wingspan:     38.2"     (970mm)
          Wing Area:    341 sq in (22 dm2)
          Weight:       3lb 8 oz   (1600g) (approximately)
          Wing Loading: 23.9 oz/sq ft (80g/dm2)
          Length:       38.6"     (980mm)
          Airfoil:      Flat bottom, low wing
          Center of Gravity: 4-5/16" (110mm) Back from the wing's leading edge
            where it meets the fuselage.
          Control Throws-
            Ailerons: Up & Down   3/16" (5mm)
            Elevator: Up & Down    3/8" (10mm)
            Rudder: Right & Left   5/8" (16mm)

COMMENTS: Pilot shown inside the plane is not included.
          At this time, the O.S. Max .15CV-DFX(K) engine is not available
            sep.; HOWEVER, you can purchase the 15CVX car engine (OSMG2034) and
            install the CVA head (OSMG5181) and the DF CARB (OSMG2415) to
            create a complete replacement engine.    AMC    upd 9/11/02
                                                                        ir/kh