This is the Commander ARR Deep Vee 46" Fiberglass Boat by Prather.
FEATURES: Gel coated hull with epoxy glass construction (no painting required)
Motor mount rails installed
Radio box installed with plywood servo tray
Hatch cover with push button fastener
Color trim applied
Flotation included (closed cell polyethylene tubing)
Complete step by step instructions with photos
INCLUDES: One Boat Hull and Hatch
One Instructions
REQUIRES: 30CC Homelite Engine (PRAG9210) or 11-15cc (.67-.91) glow engine
Running Hardware Kit (PRAB1101)
2-Channel Radio with One Standard and One Hi-Torque Servo
Boat Stand (PRAB8087)
Radio Box Seals (PRAB8113)
Antenna Holder (PRAB8088)
Large Silicone Fuel Line
Kwik Switch Mount (DUBM2203)
Propeller
Low Temperature Silver Solder
5, 15, 45 minute epoxy and CA glue
Silicone Rubber Sealant
Fiberglass Reinforcing Tape
Micro Balloon Filler
Cable Grease
One Mix Two-Cycle Oil
SPECS: Engine: 11cc to 15cc glow engine or 22cc to 30cc Gas engine
Beam: 14"
Length: 46"
COMMENTS: For using glow fuel engine contact Prather for required hardware.
mgc 11-28-98