This is the DEEP VEE 40" OFFSHORE Fiberglass Boat by Prather.
The Deep Vee is Designed for 7.5cc (.45 cu. in.) Inboard Engine.
FEATURES: Epoxy fiberglass hull
Factory joined deck and hull
Marine ply motor mount rails
Plywood bulkheads
Foam flotation
Complete instruction booklet with photos
INCLUDES: One Epoxy boat hull
One Plywood transom plate
One Stuffing box support
One Hardwood front rail cross block
Two Wood motor mount rails
Four Tank eye screws
One Plywood tank plate
Two Foam flotation tubes
SPECS: Length: 40"
Beam: 12"
Engine: 7.5cc glow engine
REQUIRES: 7.5cc inboard engine
Running Hardware (PRAB1320)
2-channel radio with one hi-torque and one steering servo.
Hatch Cover (PRAB1220)
Radio Box Kit (PRAB2305)
Cable Collet for 3/16" flex cable, to fit threads on your engine
crankshaft
Exhaust Throttle
Radio box Seals and Push Rods (PRAB2325)
Tuned Pipe, coupler, and clamps
Pressure Fitting
Starting equipment
Field and building equipment
REQUIRED 8" Triangle
TOOLS: Sandpaper and sanding block
Drill and bits
Dremel Tool with metal cutter and saw blade
Soldering Iron
1/2" Round file
C-Clamps
Screwdrivers and Pliers
MGC 10-20-98
ir/jl