This is the Deep Vee 46" Fiberglass Boat by Prather. The Deep Vee is Designed
for a 11cc to 15cc (.67-.91cu. in.) Nitro or 22cc to 30cc Gas Inboard Engine.
FEATURES: Epoxy fiberglass hull
Factory joined deck and hull
Marine ply motor mount rails
Plywood bulkheads
Foam flotation
Complete instruction booklet with photos
INCLUDES: One Epoxy boat hull
One Plywood transom plate
One Stuffing box support
One Hardwood front rail cross block
Two Wood motor mount rails
Four Tank eye screws
One Plywood tank plate
Two Foam flotation tubes
SPECS: Length: 46"
Beam: 14"
Engine: 11cc to 15cc glow or 22cc 30cc gas
REQUIRES: 11cc or 15cc inboard engine
Running Hardware (PRAB1320)
2-channel radio with one hi-torque and one steering servo.
Hatch Cover (PRAB1230)
Radio Box Kit (PRAB2305)
Cable Collet for 3/16" flex cable, to fit threads on your engine
crankshaft
Exhaust Throttle
Radio box Seals and Push Rods (PRAB2325)
Tuned Pipe, coupler and clamps
Pressure Fitting
Starting equipment
Field and building equipment
REQUIRED 8" Triangle
TOOLS: Sandpaper and sanding block
Drill and bits
Dremel Tool with metal cutter and saw blade
Soldering Iron
1/2" Round file
C-Clamps
Screw Drivers and Pliers
MGC 10-20-98
ir/jl