This is the radio controlled, electric powered,
Great Planes Slinger almost-ready-to-fly expanded foam flying wing kit
For Intermediate to Advanced Modeler/Flyers.
FEATURES: Construction: Expanded foam, rip, bend, and break resistant
Wings: One piece foam with ABS plastic winglets to add stability
covered in heat shrink film
Motor: Speed 400 size with prop
Radio compartment: concealed underneath ABS center section
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase.
INCLUDES: Speed 400 motor with two props, two wing halves, center section,
canopy, Velcro tape strip, pushrods with tubes, wing fins, decals,
control horns, battery connector, photo-illustrated instructions,
nylon tie strap, wing tape, and center section tape.
REQUIRES: Battery: 8 cell, 1100mAh (GPMP0310)
Charger: GPMM3001 or GPMM3150
**to use either charger, adapters will need to be
made. See Completion Guide for details**
Radio: 3 channel with electronic mixing (or optional mixer GPMA2428)
Servos: 2 mini or micro (min. of 15 oz-in of torque)
Speed Control: 15amp electronic (GPMA2429)
Glue: 6 minute epoxy (GPMR6042)
Misc. Items: Building and field equipment
SPECS: Wingspan: 47.4" (1204mm)
Wing Area: 462.8sq in (29.85sq dm)
Weight: 27oz (765g)
Wing Loading: 8.4 oz/sq ft (25.6 g/sq dm)
Center of Gravity: 8" (203mm) Back from front tip of plane inverted
Control Throws: Low Rate High Rate
Elevator, up and down: 3/8" (10mm) 1/2" (13mm)
Ailerons, up and down: 1/2" (13mm) 3/4" (19mm)
jxs 2/25/03
***updated*** cmc 06/03/03
ir/jxs
|