This is the Great Planes Spacewalker 1/4 Scale ARF IMAA Legal airplane kit.
It is an Open Cockpit, Single Seat, Low-Wing Sport Plane based on the classic
WWII era of military trainer aircraft.
FEATURES: All plywood and balsa wood construction.
Main sections are factory-built w/genuine MonoKote covering applied.
Can be ready to fly in just a few evenings.
ABS cowling and wheel pants pre-painted to match covering.
Elevator halves function independently using dual yoke precision.
Pre-welded steel main landing gear and a tailwheel assembly
Dual aileron servos and a bolt-on wing.
INCLUDES: Prebuilt and covered fuselage, wings, tail sections, ABS cowl and
wheel pants, wire landing gear, adjustable engine mount, windshield
pushrods, tailwheel, hardware package, CA hinges, main wheels,
2-1/2" spinner and 14 oz tank.
REQUIRES: Engine: .61-.75 (10-12cc)(2-stroke) or .70-.91 (11.5-15cc)(4-stroke)
Radio: 4+ Channel
Servos: 5 servos, including at least one 45 oz/in servo
(4 45+ oz/in servos required to be legal at IMAA events)
Servo Extensions: Two 24" (from Y-harness to aileron servo)
Y-Harness: One (from receiver to aileron extensions)
Misc. Items: Prop, Fuel Tubing, Foam Rubber, Large
Control Horns, Switch Charge Jack, Building and Field Equipment.
SPECS: Wingspan: 79" (2005mm) CG: 4-1/4"
Wing Area: 1096 sq in (70.7sq dm) THROWS: ele 1"hi 5/8" low
Weight: 8-8.75 lb (3600-3940g) rud 1-3/4"
Wing Loading: 16.6-18 oz/sq ft (51-56g/sp dm) ail 1-1/4" hi 1" low
Length: 54.5" (1385mm)
Airfoil: Semi-symetrical engine is -2 degrees.
Incidence: with stabilizer at Zero, the Main Wing is +3 degrees.
Dihedral- 2 5/8" at one tip with other tip flat on desk.
COMMENTS: Pilot figure not included with kit, use DGAQ2010.
Covering is Missile Red and Cub Yellow.
This Kit IS IMAC-Legal. It is also IMAA legal because it is 1/4 scale
COMMENTS CONT'D: All control surfaces are built up, not strip. JAL 7/28/98
That is to say, they have leading edges and
ribs, they are not solid.
|