Quick assembly — powerful climbs
All-wood main sections arrive factory-assembled and covered with Top Flite® MonoKote® film.
Fly in as little as 20 minutes with the Select RTF!
Includes an ElectriFly T-601 motor. Comes complete with Hitec Focus 3SS radio system, electronic speed control and NiCd battery!
Triple-taper wing with modified Selig 3010 airfoil adds stability — folding propeller minimizes drag and the potential for damage when landing.
Tinted canopy lifts off for easy access to on-board gear, and includes a high-tech, NACA style vent for cooling.
This is the Great Planes All-Wood Spectra Select
Ready-To-Fly Glider (Sailplane)
The wing is shaped to increase stability, making the
Spectra as suitable for entry-level pilots as experienced fliers.
FEATURES: Covering: Factory-covered in genuine Top Flite MonoKote film. Color
scheme is white with a dark blue accent on the forward section of
wing and tail sections separated by red and orange pinstripes.
Building Time: Flight ready in as little as two hours.
Motor: Pre-installed ElectriFly T-601 with electronic speed control.
Battery: 8.4V 7 cell, with standard connector. (NiCd)
Radio: Hobbico three channel AM 72mHz with elevator and rudder trims
and LED battery indicator.
Servos: Two Hobbico CS-61 standard size.
Wing: Two piece flat bottom slide together-no glue required with
aluminum reinforced wing joiner for extra stability.
Airfoil: Modified Selig 3010 flat bottom for greater stability for
inexperienced pilots.
Tail: Self-aligning. The horizontal stabilizer slides into a slot at
the back of the fuselage. The vertical stabilizer plugs in from the
top and is secured with two bolts.
Canopy: Easy lift-off access to on-board gear with NACA style vent
to help cool the battery and speed control.
Warranty: Great Planes guarantees this kit to be free from defects in
material and workmanship at the date of purchase. This warranty
does not cover any parts damaged by use or modification.
INCLUDES: One Great Planes All Wood Spectra Select Ready To Fly Glider Kit with
Pre-covered left and right wing halves, fuselage, tail set, tinted
plastic canopy, wing joiner, motor, electronic speed control, 3
channel radio, seven cell NiCd battery, pre installed pushrods,
hardware, spinner, 8 x 4 prop, illustrated instruction manual.
SPECS: Wingspan: 78.5" (1995mm) Wing loading: 10.6oz/sq ft (32g/sq dm2)
Wing Area: 676 sq in (43.6sq dm2) Aspect Ratio: 9:1
Weight: 3.1lb (1400g) Fuselage Length: 37.5" (953mm)
CG (Center of Gravity): 3-1/8" (79.4mm) under main wing spar at
fuselage.
Control Throws:
Elevator-up and down: 1/2" (13mm)
Rudder-left and right 1-1/2" (38mm)
REQUIRES: Batteries: Eight AA for transmitter.
Battery Charger: Peak or timed for 8.4V battery.
Rubber Bands: #64 size for mounting wings.
COMMENTS: Can also be launched with a glider launching device such as a Hi
Start.
It is recommended to use ONLY the supplied battery (GPMA2344), with
this kit.
kzh10-19-01
JXS 6/21/02
ir/kh
|
Shop by:
